|
|
|
—— RapidECU-ACCU
High-speed motor controller products carry ISO26262 standards of the latest generation of 32-bit processor chips, all-digital fuzzy, BLDC and other kinds of motors, three-phase motor, the control of classic support vector control algorithm, to provide current and speed two kinds of control mode, the software provides a rich state of control interface and interface Simulink module, support user-defined motor control application layer algorithm with user-defined CAN communication protocol and support direct import of DBC file, CAN be used to 50000 RPM, 80000 RPM, 150000 RPM high speed motor control, etc.
• RapidECU-ACCU Application Characteristics
It can be used in high speed motor controller.
|
Basic Parameters |
|
Type of motor supported |
Permanent magnet synchronous motor, BLDC motor |
|
Control algorithm |
No sensor vector control, motor parameters self-learning |
|
Dc bus voltage |
Normal working voltage 200V~750V |
|
Low voltage Power supply voltage |
Normal working voltage 9V~32V |
|
Operating environment temperature |
-40℃~+85℃ (operation at 55℃ or above) |
|
Maximum motor speed |
2500Hz (corresponding to 150,000 RPM of single-pole motor and 75,000 RPM of double-pole motor) |
|
Motor start time |
Less than 1 s |
|
Maximum acceleration of motor |
500Hz/s |
|
Output current |
Peak value: 200A (corresponding maximum capacity: 30kVA) |
|
Protection function |
Over voltage protection, under voltage protection,
over current protection,
over temperature protection |
|
Communication |
CAN bus, accord with CAN2.0b, ISO11898 |
|
Program flash |
CAN Bus-based Boot-loader |
|
Level of protection |
Dust-proof and waterproof grade IP67 (with IP67 waterproof wire harness) |
|
Type of cooling |
Water cooling |
|
Shell |
Aluminum, external dimensions
296mm×282mm×99mm |
|
Weight |
About 6 kg |
|
