|
Basic Parameters |
|
Micro controller |
MPC5634M, 32 bit, 80MHz, hardware floating point unit |
|
SRAM 94KB,Flash 1.5MB,EEPROM 512Kb |
|
Power supply |
Supply voltage: 16V~32V |
|
4-channels of 5V sensor power supply,3-channels of 12V sensor power supply |
|
Input |
8 analog inputs, 5 voltage inputs (active sensor), 3 resistance inputs (passive sensor) |
|
8-channels of switching input, 4-channels of high effective, 4channels of low effective |
|
9 frequency input, no.5 hall sensor signal (square wave signals), 4-channels, 250 Ω pull down resistor, used for Speed sensor signal acquisition |
|
Output |
2-channels H-bridge power drive output, rated current 10A, peak current 40A, with current feedback |
|
3 low side drive, integrated hardware channel protection function |
|
Communication |
CAN, 2 -channels, CAN2.0b, ISO11898 |
|
Environment |
Protection class: IP67, working temperature: -40℃~+85℃, weight about 400g
The protection of climate and environment conforms to ISO16750-4 and the protection of chemical environment conforms to ISO16750-5
Vibration, impact and drop tests conform to ISO16750-3 |
|
EMC Features |
|
ESD |
Air ELECTROSTATIC discharge test and contact electrostatic discharge test meet the relevant requirements of ISO 10605-2008 |
|
BCI |
Electromagnetic radiation immunity conforms to the relevant requirements of GB/T 17619-1998 |
|
CE |
The related requirements of conducting disturbance are in line with 2008f GB/T 18655-2010 |
|
RE |
Radiation harassment complies with the relevant requirements of GB/T 18655-2010 |
|
CI |
The transient conduction immunity along the power line conforms to the relevant requirements of ISO 7637-2:2004 |
