|
|
|
—— RapidECU-S2V4
RapidECU-S2V4 is a product-level rapid prototype controller for automotive automatic transmission and other fields. It is designed for complex real-time control system requirements. RapidECU-S2V4 controller hardware is equipped with high-performance microprocessor chips MPC5674F and MPC5643L, with up to 264MHz main frequency and large memory space, which can store and run a variety of complex control software.
• RapidECU-S2V4 Application Characteristics
It can be applied to automatic transmission controller, hybrid power controller and so on.
|
Basic Parameters |
|
Micro controller |
MPC5674F,32-bit,frequency 160MHZ (max 264MHZ),hardware floating point unit |
|
Flash 4MB,SRAM 256KB,EEPROM 8Kb |
|
Power supply |
Supply voltage:9V~32V |
|
3-channels 5V sensor power supply, 2-channels voltage can be configured (default configuration is 5V), 1.5~10V, 300mA |
|
Input |
18-channels of analog input, among which 12-channels of voltage input (active sensor), 6-channels of resistance input (passive sensor) |
|
8-channels switch input, 3-channels configuration for high efficiency, 5-channels configuration for low efficiency |
|
6-channels frequency input, support Hall type sensor signal (square wave signal) |
|
Output |
12-channels high-side switch: 8-channels rated current 0.3A, switching operating mode, 4-channels rated current 1A, compatible with switching operating mode and PWM operating mode |
|
12-channels low side switch: 8 ways rated current 0.4a, 1 way rated current 1A, switch operating mode, 3-channels rated current 1A, compatible switch operating mode and PWM operating mode |
|
8-channels low constant current power drive, rated current 2.0A, low side drive, constant current control, with flutter mode and current feedback, over current, over voltage, overheat protection |
|
2 BLDC motor drive, rated current 16A, blocking current 40A, peak current 60A, with current feedback |
|
Communication |
4-channels CAN,CAN2.0B,ISO11898 |
|
LIN, 2-channels host |
|
Environment |
Protection class: IP67, working temperature: -40℃~+85℃, weight about 1.6kg
The protection of climate and environment conforms to ISO16750-4 and the protection of chemical environment conforms to ISO16750-5
Vibration, impact and drop tests conform to ISO16750-3 |
|
EMC Features |
|
ESD |
Air ELECTROSTATIC discharge test and contact electrostatic discharge test meet the relevant requirements of ISO 10605-2008 |
|
BCI |
Electromagnetic radiation immunity conforms to the relevant requirements of GB/T 17619-1998 |
|
CE |
The related requirements of conducting disturbance are in line with 2008f GB/T 18655-2010 |
|
RE |
Radiation harassment complies with the relevant requirements of GB/T 18655-2010 |
|
CI |
The transient conduction immunity along the power line conforms to the relevant requirements of ISO 7637-2:2004 |
|
