|
|
|
—— RapidECU-FCE
RapidECU-FCE is a new generation of mass production electronic control unit, support vehicle controller VCU, fuel cell engine controller and other controller rapid prototype development and batch matching.
• RapidECU-FCE Application Characteristics
It can be used in fuel cell engine controller, fuel cell vehicle controller, etc.
|
Basic Parameters |
|
Micro controller |
MPC5554, 32 bit, 80MHz, hardware floating point unit |
|
SRAM 64KB,Flash 2MB,EEPROM 64Kb |
|
Power supply |
Supply voltage: 9V~32V |
|
4-channels 5V sensor power supply |
|
Input |
16 analog input channels, including 8 voltage input channels (active sensor), 8 resistance input channels (passive sensor) |
|
3-channels switch input, 2-channels high effective, 1-channels low effective |
|
Output |
4-channels high side drive, rated current 8A, compatible with PWM and work switch working mode. Switch delay <0.5ms, high side switch total power consumption <15A |
|
16-channels low side drive, 8-channels rated current 1.8A, switching mode, 4-channels rated current 1A, switching mode, 4-channels rated current 1.8A, PWM operating mode |
|
1-channel H bridge power drive output, rated current 3A |
|
4-channels double-end power drive output, rated current 2A, PWM operating mode |
|
Communication |
CAN,3-channels,CAN2.0B,ISO11898 |
|
Environment |
Protection class: IP67, working temperature: -40℃~+85℃, weight about 600g
The protection of climate and environment conforms to ISO16750-4 and the protection of chemical environment conforms to ISO16750-5
Vibration, impact and drop tests conform to ISO16750-3 |
|
EMC Features |
|
ESD |
Air ELECTROSTATIC discharge test and contact electrostatic discharge test meet the relevant requirements of ISO 10605-2008 |
|
BCI |
Electromagnetic radiation immunity conforms to the relevant requirements of GB/T 17619-1998 |
|
CE |
The related requirements of conducting disturbance are in line with 2008f GB/T 18655-2010 |
|
RE |
Radiation harassment complies with the relevant requirements of GB/T 18655-2010 |
|
CI |
The transient conduction immunity along the power line conforms to the relevant requirements of ISO 7637-2:2004 |
|
