|
|
|
—— RapidECU-M3
RapidECU-M3 is equipped with the latest generation of 32-bit processor chips in accordance with ISO26262 standard, suitable for the prototype development and mass production of permanent magnet synchronous motor and BLDC motor. It supports the rotary transformer type position sensor, the algorithm adopts vector control, and the controller algorithm supports the model (MBD) based secondary development and design. Patented cooling design technology, high hardware reliability, batch hardware to provide 8 years or 150,000 km warranty.
• RapidECU-M3 Application Characteristics
It can be used in permanent magnet synchronous motor and BLDC motor control.
|
Basic Parameters |
|
Main chip |
TC275, 32-bit, 3-core, Max. 200Mhz, hardware floating-point unit, ISO26262 |
|
Type of motor supported |
Permanent magnet synchronous motor, BLDC motor |
|
Basic purpose |
Automotive motor control \ Distributed hub motor control |
|
Control algorithm |
Vector control |
|
Operation mode |
Torque mode, speed mode |
|
Communication |
CAN2.0B,ISO11898 |
|
Program flash |
CAN Bus-based Boot-loader online brush |
|
Demarcate |
ASAM2 standard CCP Agreement |
|
Rated power（KW） |
60KW |
|
Peak power（KW） |
100KW |
|
Low voltage operating voltage range（V） |
9~16V |
|
High voltage operating voltage range（V） |
250~700 |
|
Operating environment temperature |
-20℃~+60℃ (operation at 55℃ or above) |
|
Level of protection |
IP65 |
|
Type of cooling |
Water cooling |
|
