|
|
|
—— RapidECU-M2
RapidECU-M2 product is equipped with the latest generation 32-bit processor chip conforming to ISO26262 standard, suitable for the prototype development and mass production of permanent magnet synchronous motor and BLDC motor. It supports the rotary transformer type position sensor, the algorithm adopts vector control, and the controller algorithm supports the model (MBD) based secondary development and design. Patented heat dissipation design technology, peak power density is greater than 16kVA/Kg, high hardware reliability, batch hardware provides 8 years or 150,000 km warranty.
• RapidECU-M2 Application Characteristics
It can be used in permanent magnet synchronous motor and BLDC motor control.
|
Basic Parameters |
Type of
motor supported |
Permanent magnet synchronous motor, BLDC motor |
|
Basic purpose |
Automotive motor control \ Distributed hub motor control |
|
Control algorithm |
Vector control |
|
Operation mode |
Torque mode, speed mode |
|
Communication |
CAN2.0B,ISO11898 |
|
Program flash |
CAN Bus-based Boot loader online brush |
|
Demarcate |
ASAM2 standard CCP Agreement |
|
Nominal capacity |
60kVA |
|
Max capacity |
160kVA |
|
Rated voltage |
384V |
|
Rated current |
200A |
|
Peak current |
400A |
|
Operating environment temperature |
-40℃~+65℃ (operation at 55℃ or above) |
|
Level of protection |
IP66 |
|
Type of cooling |
Water cooling |
|
Weight |
≤10kg |
|
