|
Basic Parameters |
|
Micro controller |
MPC5634M, 32 bit, 80MHz, hardware floating point unit |
|
SRAM 94KB,Flash 1.5MB,EEPROM 512Kb |
|
Power supply |
Power supply voltage: 9V~32V(OGR2 is 9V~16V, OGR2V24 is 9V~32V) |
|
2-channel 5V sensor power supply |
|
Input |
There are 6 analog input channels, including 5 voltage input channels (active sensor) and 1 resistance input channel (passive sensor). |
|
5-channels switch input, high efficiency |
|
2-channels frequency input, support Hall type sensor signal (square wave signal) |
|
Output |
1-channel H bridge power drive output, rated current 15A, peak current 40A, with current feedback |
|
2 low side drive, integrated hardware channel protection function |
|
Communication |
CAN, 2 -channels, CAN2.0b, ISO11898 |
|
Environment |
Protection class: IP66, working temperature: -40℃~+85℃, weight about 300g
The protection of climate and environment conforms to ISO16750-4 and the protection of chemical environment conforms to ISO16750-5
Vibration, impact and drop tests conform to ISO16750-3 |
|
EMC Features |
|
ESD |
Air ELECTROSTATIC discharge test and contact electrostatic discharge test meet the relevant requirements of ISO 10605-2008 |
|
BCI |
Electromagnetic radiation immunity conforms to the relevant requirements of GB/T 17619-1998 |
|
CE |
The related requirements of conducting disturbance are in line with 2008f GB/T 18655-2010 |
|
RE |
Radiation harassment complies with the relevant requirements of GB/T 18655-2010 |
|
CI |
The transient conduction immunity along the power line conforms to the relevant requirements of ISO 7637-2:2004 |
