|
|
|
—— RapidECU-S2V3
RapidECU-S2V3 is a product-level rapid prototype controller for automotive automatic transmission, hybrid power system, clutch, hydraulic mechanism and other fields. Equipped with a high-performance microprocessor chip MPC5674F, RapidECU-S2V3 can store and run a variety of complex control software with a high frequency of 264MHz and a large memory space.
• RapidECU-S2V3 Application Characteristics
It can be applied to automatic transmission controller, hybrid power controller and so on.
|
Basic Parameters |
|
Micro controller |
MPC5674F,32-bit,frequency 160MHz（max 264MHz）,hardware floating point unit |
|
Flash 4MB,SRAM 256KB,EEPROM 8KB |
|
Power supply |
Supply voltage:9V~32V |
|
3-channels of 5V,300mA,100mA,2 channels voltage configurable（default configuration 5V）,1.5~10V,300mA |
|
Input |
18-channels of analog input,including 6-channels of resistance input,12-channels of 0~5V voltage input |
|
18-channels of switching input,among which 13-channels are high effective(12-channels and 0-5v voltage input multiplexed pin),5-channels are low effective |
|
6-channel PWM frequency quantity input, Hall type sensor signal (square wave signal) |
|
Output |
12-channels high-edge switch:4-channels rated 1A(peak 4A),compatible with switch working mode and PWM working mode,with current feedback,8-channels rated 0.3A(peak 1A),switching working mode,with over current protection,over voltage protection and overheat protection |
|
20-channels low-edge switch: 4-channels 1A, compatible with switch working mode and PWM working mode, 8-channels 0.4A, switching working mode, 8-channels 0~3A, and constant current power driving multiplexing pin |
|
8-channels, 0~3A, low side drive, constant current control, with flutter mode and current feedback, over current, over voltage and overheat protection |
|
7-channels of PWM output, among which 3-channels and low-side drive multiplexing pins, 4-channels and high-side drive multiplexing pins |
|
Communication |
4-channels CAN,CAN2.0B,ISO11898 |
|
LIN, 2-channels host |
|
Environment |
Protection class: IP67, working temperature: -40℃~+85℃, weight about 600g
The protection of climate and environment conforms to ISO16750-4 and the protection of chemical environment conforms to ISO16750-5
Vibration, impact and drop tests conform to ISO16750-3 |
|
EMC Features |
|
ESD |
Air ELECTROSTATIC discharge test and contact electrostatic discharge test meet the relevant requirements of ISO 10605-2008 |
|
BCI |
Electromagnetic radiation immunity conforms to the relevant requirements of GB/T 17619-1998 |
|
CE |
The related requirements of conducting disturbance are in line with 2008f GB/T 18655-2010 |
|
RE |
Radiation harassment complies with the relevant requirements of GB/T 18655-2010 |
|
CI |
The transient conduction immunity along the power line conforms to the relevant requirements of ISO 7637-2:2004 |
|
